Controls 58-C0181/DGT - SET of MEASUREMENTS Menu

Manuale di Istruzioni
Instruction Manual
58-C0181/DGT Rev. 2 EN 04/02/2015
29
Where:
• RI: measured rebound measured
• STRENGTH: estimation of the compression strength calculated according to the
correlation curve previously selected
• IMPACT ANGLE: inclination of the instrument when the measurement was taken
• CONVERS. CURVE: correlation curve previously set
• SHAPE: shape of the sample previously sett
• AGE FACTOR: age of the sample previously set
• CORRECTION FACTOR: correction factor previously set.
The SPARE MEASUREMENT method does not allow saving the test report.
3.2.4.2 SET OF MEASUREMENTS menu
When selecting the option SET OF MEASUREMENTS, the display shows the
preliminary number of records in which the result will be saved and the configuration
parameters previously set.
Fig. 3-21
• STANDARD
• CONV. CURVE
• SHAPE
• AGE FACTOR
• CORRECTION FACTOR.
Press ENT to show the following screen:
Fig. 3-22