Manuale di Istruzione
Instruction Manual
04/02/2015 58-C0181/DGT Rev. 2 EN
46
4.1 Preventive maintenance
Next table shows the maintenance actions to be carried out on the equipment:
Action Who When
Check to ensure that there is no
external damage to the equipment,
which could jeopardise the safety of
use
Operator Before every working session
Check status and functioning of the
operator's command
Operator Before every working session
Check the inclinometer (see chapter
4.2.1)
Operator Once a year or every time the
results are not reliable
Check the calibration with the test
anvil (see chapter 4.2.2)
Operator Once a year or every time the
results are not reliable
General inspection Operator Weekly
Cleaning of the mechanical parts
(see chapter 4.3)
Authorized service
engineer
After approx. 2000 strikes
Replacement of the batteries Authorized service
engineer
When necessary (e.g. The
maximum duration of the
battery charge decreases
drastically)
To Next Page
Loading...