Controls 58-C0181/DGT User Manual

Manuale di Istruzione
Instruction Manual
04/02/2015 58-C0181/DGT Rev. 2 EN
ii
3.3 Test execution ................................................................................................................... 35
3.3.1 Criteria to select the impact point ................................................................................... 35
3.3.2 Surface preparation ........................................................................................................ 35
3.3.3 Uso of the test hammer ................................................................................................... 36
3.4 PC connection ................................................................................................................... 38
3.4.1 Installing the program .................................................................................................... 38
3.4.2 Use of the software program C0181/DGT Manager ...................................................... 40
3.4.2.1 Main screen .................................................................................................................... 40
3.4.2.2 DOWNLOAD MEASUREMET menu .......................................................................... 41
3.4.2.3 DATE AND TIME UPDATE menu .............................................................................. 42
3.4.2.4 SAVE menu ................................................................................................................... 42
3.4.2.5 OPEN menu ................................................................................................................... 43
3.4.2.6 GENERATE REPORT menu ......................................................................................... 43
3.4.2.7 FIRMWARE UPDATE menu ........................................................................................ 44
3.4.2.8 ADVANCED ................................................................................................................. 44
4. MAINTENANCE 45
4.1 Preventive maintenance .................................................................................................... 46
4.2 SERVICE menu ................................................................................................................ 47
4.2.1 HAMMER CHECK menu .............................................................................................. 47
4.2.2 ANVIL CHECK menu ................................................................................................... 48
4.2.3 TILT SENSOR CHECK menu ....................................................................................... 49
4.2.4 RESET TO FACTORY menu ........................................................................................ 49
4.3 Cleaning of mechanical parts ............................................................................................ 50
5. DIAGNOSTICS & TROUBLESHOOTING 51
5.1 Troubleshooting ................................................................................................................ 52
This instruction manual is an integral part of the machine and should be read before using the machine and be
safely kept for future reference.
CONTROLS reserves all rights of this manual, no part or whole can be copied without the written permission of
CONTROLS .
The proper use of this machine must be strictly adhered to, any other use must be considered as incorrect.
The manufacturer cannot be held responsible for damage caused by incorrect use of the machine.
The machine must not be tampered with for any reason. In case of tampering, the manufacturer declines any
responsibility of functioning and safety of the machine.
This Manual is published by CONTROLS.
CONTROLS reserves the right to update its manuals without notification in order to correct possible typing
errors, mistakes, updating of information and/or updating of programs and/or accessories.
Such changes will be inserted in the latest edition of the current manual
.
This present in English is the original version of the manual. Printed in Italy

Controls 58-C0181/DGT Specifications

General

Brand	Controls
Model	58-C0181/DGT
Category	Laboratory Equipment
Language	English