General Information
10
1.7 ACCESSORIES
READ CAREFULLY: Read the instructions and the mode of use for the accesso-
ries that have been installed on your machine carefully. Refer to the instruction
manual that was provided with them.
The machine is furnished with equippment to make it possible to carry out normal
maintenance operations. It is also equipped with a hydraulic force instrument: in
the manual the instructions for its use have been furnished. Also, the machine the
may also be equipped upon request with particular tools including:
Cement mixer for mixing concrete;
Auto-loading tools;
Excavator;
Demolition hammer.
1.8 SAFETY TAGS
READ CAREFULLY: During the design phase everything possible was done to prevent
eventual risks: where it was technically impossible, specific pictograms were resort-
ed to in order to highlight eventual potential and imminent risks. Specific adhesive
tags were made with signals and descriptions associated with pictograms to give a
higher importance to possible dangers, in accordance with government norms UNI
9244-95 (E).
PROHIBITED: it is strictly prohibited to remove the stickers and the safety plates
which the machine is equipped with: immediately substitute deteriorated and/or il-
legible ones.
To Next Page
Loading...
