Maintenance
47
WARNING: The maintenances are to be made by an authorized service center
Cormidi or approved centers, maintenance occurred obligatorily be issued a re-
ceipt to be kept for the purposes of continuity of the guarantee.
4.2 MOTOR
READ CAREFULLY: Carefully read the instructions and the mode of use for
the motor found in the attached specific manual.
The machine that was delivered could be equipped at the origin with different en-
gine types for specific needs and/or markets.
A correct maintenance is the best way to conserve the motor of your machine so
that it is always working at its highest efficiency and this allows you to maintain
low operation costs.
For the maintenance of the motor, pay scrupulous attention to the attached man-
ual that was given to you.
REQUIRED: When changing the motor oil, always use a suitable aspirator to
remove old oil. Avoid the dispersion of oil and filters in the environment and
carry out their disposal with respect for the environment and the regula-
tions in force.
4.2.1 Clean the machine
Your machine must be thoroughly cleaned so that it can be efficiently every
time they are used.
To ensure proper operation of the machine is necessary to check the com-
ponents exposed such as jacks, hydraulic motors, hydraulic pump, oil tank
and fuel oil, diesel fuel level meter, distributor and all the pipes present.
CAUTION: Do not throw water on the electrical parts of the machine.
4.2.2 Control of oil leakage and / or fuel
To the naked eye to check whether the piping and / or other machine
components unfortunately allow the escape of liquids such as oils, fuel.
Check for any loss of liquids
To Next Page
Loading...
