General Information
5
1.5 MACHINE AND MANUFACTURER IDENTIFICATION
The data which identifies the machine and the manufacturer are listed on the al-
uminium plate that is affixed on the dashboard of the machine. The frame num-
ber is Impressed on the left rear fender (see fig. 1).
fig. 1 - Identification Plate (cod. C1094.14.10)
1.6 SAFETY DEVICES
WARNING: Before beginning work, verify the working order of the safety devices
and substitute any worn-out and/or broken parts immediately.
PROHIBITED: it is strictly prohibited to use the machine with its safety devices and
protection removed, blocked, or in any way made non functional.
To Next Page
Loading...
