WARNING:
• When you start the engine using connection cables, wear protective goggles.
• If you start the engine by taking electrical power from another machine, check
that your machine does not come into contact with the other machine.
• To connect the starter cables, start with the positive terminal. To disconnect
them, start with the negative terminal (mass).
• If a tool comes into contact with the machine's positive terminal, there is a risk of
sparks.
• Do not connect the connection cables to the terminals in reverse polarity. For ex-
ample, never connect the negative terminal on one machine to the positive termi-
nal on the other machine.
• The capacity of the starter cables and the size of the clips must be adapted to the
size of the battery.
• Check that there is no damage, cracks or corrosion on the starter cables and clips.
• The machines' batteries must have the same capacity.
To Next Page
Loading...
