Instruction for use
34
3.9 UNLOADING MATERIAL
3.9.1 Overturning of the Body
WARNING - Before unloading, be certain that the terrain is flat, solid and compact.
Carry out the dumping manoeuvre slowly and uniformly. Do not move forward
with the machine during the dumping phase.
Your machine is equipped with a hydraulic dumping device for the body which allows for the
unloading of material.
To carry out the dumping manoeuvre:
Position yourself on a level, solid, and compact surface or terrain;
If the machine is equipped with a farming body, unblock the anterior side;
Push the lever forward to provoke the overturning of the body and the unload-
ing of the material;
Pull the lever back until the body has returned to travelling position, and then
release the lever
CAUTION: During the unloading, if the body hits up against an obstacle, avoid moving
the machine forward: this could damage the junctions of the body!
PROHIBITED: It is strictly prohibited to travel if the body is not in its resting position.
To Next Page
Loading...
