Instruction for use
35
3.9.2 Raising the Body (“Hi-Tip”)
On request the machine may be equipped with a hydraulic device to raise the
body during the unloading to allow for unloading in containers or tubs with high
walls, named “Hi-Tip”.
To unload material normally, use the lever for the overturning of the body (as in-
dicated in the preceding paragraph).
To carry out a high unloading, proceed as follows:
Position yourself on a level surface or on a level, solid, and compact terrain;
Use the lever of the auto-loading device pushing it forward to place the shovel
on the ground in order to stabilize the machine;
Raise the body to the desired height by pushing forward the lever for raising;
Push the overturning lever for the body forward to allow for the unloading of
the material.
fig. 23 – Position for high unloading
To bring the body back to a driving position, proceed as follows:
Pull back the overturning lever and bring the body back to a horizontal posi-
tion;
Release the command lever for the body
Pull the lever for raising the body backward until it has reached the driving po-
sition; Release the raising lever.
DANGER: Never carry out the raising of the body without first stabilizing the
machine with the auto-loading shovel.
DANGER: Never, for any reason, activate the raising lever while driving. You
could provoke the overturning of the machine
To Next Page
Loading...
