Instruction for use
31
3.5.8 Movement in Curves
To allow the machine to turn one must release the lever on the side to
which one intends to turn:
To turn to the right, release the right-hand drive lever;
To turn to the left, release the left-hand drive lever.
The steering is determined by the slowing of the speed of one track with respect
to the other. Consequently the speed and the degree of steering are proportional
to the intensity of the release and to the pressure with which you apply to each
lever.
3.5.9 Counter-rotation
It is also possible to make the machine spin round, carrying out a complete “coun-
ter-rotation” around its axis, in order to carry out manoeuvres in small spaces.
To make a clockwise counter-
rotation (towards the direction
of the clock hands) you must
push the left-hand lever forward
and pull the right-hand lever
back;
fig. 20 – Controrotazione oraria
To make a counter-clockwise
counter-rotation (towards the op-
posite direction of clock hands) you
must push the right-hand lever
forward and pull the left-hand lev-
er back.
fig. 21 – Controrotazione antiora-
ria
Using the counter-rotation manoeuvre often reduces the duration of the
rubber tracks, especially if you do it upon rough surfaces.
To Next Page
Loading...
