General Information
13
• Do not remove the protections on the moving parts
• Wear work clothes having the protections of the prescribed type;
• Do not adjust and / or remove and / or assembly parts during the running
1.8.7 Maximum Slopes
Completely avoid working on terrains that have
latitudinal slopes of more than 10° and longitudi-
nal slopes of more than 20° to avoid the possibility
of overturning with serious consequences for the
safety of the operator. In every case, but especial-
ly in the case of slopes, it is important that the ter-
rain is solid and stable.
1.8.8 Modo di Affrontare le Pendenze
Nameplate indicating the way for to avoid serious
consequences to the user and the machine as
there is a potential danger of tipping.
.
1.8.9 Safety in the engine place
Name plate indicating to pay attention in the en-
gine place Are given the following directions from
left to right:
- No adjust and / or modify the parts during the
running,
- Do not remove the safety guard
- Do not touch
- Do maintenance during the running
1.8.10 Other Tags
The label on the side (fig. 12-a) indicates that it is
necessary to read the documentation before any in-
tervention, to avoid technical problems (ex. Manual
attached to the engine).
To Next Page
Loading...
