Instruction for use
37
3.10 SUPPLEMENTARY HYDRAULIC COMMAND
Some versions may be equipped with a hydraulic force instrument for the com-
mand of auxiliary equipment.
The hydraulic force instrument is composed of two openings with rapid transmis-
sion of standard type, indicated by the letters “A” and “B”, situated on the right
side of the dashboard.
To obtain hydraulic oil pressure on the openings you must work the auxiliary
command lever.
To obtain pressure on the “A” opening, push the lever forward.
To obtain pressure on the “B” opening, pull the lever backward, toward your-
self.
READ CAREFULLY: Read the user’s instructions carefully for all accessories
and/or tools that have been installed on your machine. Always refer to the
manual which was provided with them and always keep it attached to this
manual.
3.11 ELECTRICAL PLUG
Your machine it's equipped with
some devices that make it more
complete. To the side is shown the
position of the 12V DC power outlet
(see fig. 24) that provides power for
operation of electrical devices with
additional features highlighted by
the close label.
fig. 24 – electrical plug 12V
To Next Page
Loading...
