cormidi Dumper - Page 58

Inconveniences and breakdowns
54
Excessive noise from the tracks
during movement.
Incorrect track tension.
Register the tension.
Broken or worn tracks.
Replace the tracks.
Broken rollers or ball bearings.
Have the motor looked at by a mechanic
with this specific competence
Excessive noise from the body or
from the arms of the bucket.
Needs greasing..
Greasing
Broken rollers.
Have the machine repaired by a mechanic
The accelerator does not re-
spond.
Il cavo dell’acceleratore è rotto.
Fate sostituire il cavo da un’officina mec-
canica
The motor does not work cor-
rectly or makes an excessive
amount of noise.
Various causes.
Have the motor looked at by a mechanic
with this specific competence
The motor does not develop
power.
The air filter is blocked.
Replace the air filter.
Various causes.
Have the motor looked at by a mechanic
with this specific competence
The motor does not start.
Not enough fuel.
Refuel the machine
The start-up procedure was not
carried out correctly.
Follow the correct start-up procedure
The battery is dead.
Have the battery recharged or replace it