ABS 2.0 Operator’s Manual
© 2019, Cornelius Inc. - 43 - Publication Number: 621058590OPR
6.
Rinse the nozzle components in lukewarm,
clea
n water to remove soapy residue.
Figure 94.
7.
Spray sanitizer on the nozzle, diffuser, and
gasket
Figure 95.
8. Wipe the nozzle and diffuser with a soft cloth
Figure 96.
9. Let air dry for 5 minutes
Figure 97.
10.
Reinstall the diffuser gasket in the diffuser by
a
ligning the square notch on the gasket and the
diffuser.
NOTE: Ensure gasket is seated properly and
co
rrect side is facing upwards.
Figure 98.
Table 30. Nozzle Cleaning (Continued)
Step Action Figure
To Next Page
Loading...
