ABS 2.0 Operator’s Manual
© 2019, Cornelius Inc. - 47 - Publication Number: 621058590OPR
7.
When ready press *START CIP PUMP* button,
o
pen spray valve with a 90° turn and begin
spraying all around hopper and hard to reach
corners. Spray until bucket is empty. Avoid
spraying directly into bottom of ice maker. Try to
spray both sides of agitator.
Figure 111.
8.
When finished press *STOP CIP PUMP* button
an
d close valve with a 90° clockwise turn. To
avoid excessive wear to CIP pump, turn off
immediately after bucket is empty.
Figure 112.
9.
Put strainer hose in bucket of clean potable
wa
ter. Make sure it reaches the bottom.
Figure 113.
10.
Open manual ice fill door and put the spray hose
in
side the hopper. Make sure the valve is closed
(handle perpendicular to valve).
Figure 114.
11.
When ready press *START CIP PUMP* button,
o
pen spray valve with a 90° turn and begin
spraying all around hopper and hard to reach
corners. Spray until bucket is empty. Avoid
spraying directly into bottom of ice maker. Try to
spray both sides of agitator.
Figure 115.
Table 31. Hopper Cleaning (Continued)
Step Action Figure