2 Handling the Unit Prior to Installation
Operator manual: Postmix tower
Ribbon
9
Cornelius Deutschland GmbH
Document no. TD0000000
Version: 19/10/2017, Index 3
2 Handling the Unit Prior to Installation
2.1 Unpacking the unit
1. Inspect the cardboard box and make a note of any damage however minimal this may
seem. If the cardboard box is damaged, please make a note of the following on the copy
of your freight invoice: “exterior cardboard box damage – concealed damage possible”.
Please contact the freight company immediately.
2. Open the cardboard box, packaging material and plastic bag in which the unit is packed.
Check the unit thoroughly for damage and to make sure it is complete in accordance with
Table 2-1.
3. Remove the packaging material from the top of the unit.
4. Check the unit housing and make sure that there are no scratches, dents or other super-
ficial defects.
5. Make sure that the glass or plastic merchandiser panel has no scratches or cracks.
6. Open the package with the loose individual parts and check all parts for damage and
completeness. Check that the received parts correspond with the packing list and make
sure that you have received all parts.
Notice!
Cornelius Deutschland GmbH is not responsible for damaged deliveries. If
any damage is found, all packaging material is to be kept and the freight
carrier is to be contacted. If the freight carrier is not contacted within 48
hours of receipt of delivery, the warranty claim might be rendered void.
Notice!
The unit is thoroughly checked ex works before being shipped. The freight
carrier has confirmed and acknowledged receipt. All damage or irregulari-
ties are to be noted at the time of delivery and reported immediately to the
freight carrier delivering. Please request a written inspection report from the
claims inspector to substantiate any claim.
Notice!
Do not put the unit down on its front or sides without the packaging as this
may damage the touchscreen or housing. This will render the warranty
claim void.
To Next Page
Loading...
