Cornelius SFV1 - Removing the Soda Lever

Installation/removal
Cornelius Deutschland GmbH
Document no. TD2005100
Version 15/03/2019, Index 0
Installation and service manual Dispensing valve
SFV1
11
4.4 Removing the soda lever
Prerequisites References
The dispensing valve has been removed. see chapter 4.2
1. Remove the fastening bolt (Fig. 12/2) from the soda lever (Fig. 12/1).
2. Remove the soda lever (Fig. 12/1).
Finishing tasks
1. Mount the dispensing valve, see chapter 4.1.
Fig. 12
1
2