corob PROsample 200 - Technical Specifications; Technical Data

- 41 -
COROB D200
8 
8.1 
D200 D200 4G 
Powersupply
CE:Single-phase100-240V~±10%
ETL:Single-phase100-120V
Frequency 50/60Hz
Fuses
(a)
F 10 A
Maximumpowerabsorbed
(a)
150 W
150W-sequenal
180/250W-simultaneousormixed
Noiselevel Levelofequivalentacouscpressure:<70dB(A)
Environmentworkingcondions
(b)
Temperature:between10°C(50°F)and40°C(104°F)
Relavehumidity:between5%and85%,withoutcondensaon
Vibraons
Themachinedoesnottransmitvibraonstotheoorthatmaycompromisethe
stabilityandprecisionofanynearbyequipment.
Dispensingtechnology Bellowpump
CircuitowratewithStandardpump 0.2 l/min \
CircuitowratewithLABpump \ \ 0.05 l/min
Nozzlecenterowdiameter
(c)
31mm(1.22”)
Dispensingsystem Sequenal Sequenaland/orsimultaneous
Dispensingcenter Internal
Typeofcanisters All-purpose(POMacetalicresin)
Typeofvalves Checkvalves
(a)Thepowerinformaonispurelyindicave,anddependsstrictlyonthemachineconguraon.
(b)Theenvironmentworkingcondionsarestrictlyrelatedtothetypeofcolorantsused(askforinformaonfromthepaintmanufacturer).Thedatashownarevalid
forthemachineonly.
(c)Holediameterforpre-punchedcans=owdiameter+15mm(0.59”).