100
Page
WORKSHOP
MANUAL
We reserve the right to modify the product and the design.
WINDSHIELD WIPER ENGINE (REMOVAL)
1. Remove the interior rear-view mirror (1) by unscrewing the two screws.
2. Remove and disconnect the interior courtesy light (2).
3. Remove the ve screws (3) from the windshield wiper cover.
4. Disable the windshield wiper button (4).
5. Remove the windshield wiper cover.
6. Lift up the cover of the windshield wiper arm (5).
7. Remove the nut (6).
8. Remove the plug (7) from the engine retaining screw.
9. Remove the plastic nut (8).
10. Remove the nuts (9).
11. Remove the four screws (10) of the interior rear view mirror bracket,
holding the four nuts from the inside.
(This procedure is illustrated on the next page).
CANOPY
9
To Next Page
