CORVUS TERRAIN DX4 PRO - Radiator Pipes and Connections Check

70
Page
WORKSHOP
MANUAL
We reserve the right to modify the product and the design.
MAINTENANCE
DANGER
TO AVOID BURNS DO NOT REMOVE THE RADIATOR
CAP OR TRY TO CHANGE THE FLUID WHEN THE
ENGINE IS STILL HOT. WAIT UNTIL IT COOLS DOWN.
WARNING
REPLACE THE GASKETS WITH NEW ONES. CHECK
FOR ANY POTENTIAL DAMAGE, LEAKS OR LACK OF
GASKETS IN THE COOLING SYSTEM.
IN COUNTRIES WITH COLD WEATHER YOU SHOULD
ADJUST THE ANTIFREEZE CAPACITY TO YOUR MINIMUM
TEMPERATURE, ADDING A MARGIN OF -5 °C.
DANGER
LIQUID CHEMICALS ARE HARMFUL TO THE
HUMAN BODY. FOLLOW THE MANUFACTURER'S
INSTRUCTIONS.
WARNING
THE USE OF INCORRECT LIQUID SOLUTIONS
MAY CAUSE DAMAGE TO THE ENGINE AND THE
COOLING SYSTEM. USE COOLANT WITH A SPECIFIC
CORROSION INHIBITOR FOR ALUMINIUM ENGINES
AND RADIATORS IN ACCORDANCE WITH THE
MANUFACTURER'S INSTRUCTIONS.
RADIATOR PIPES AND CONNECTIONS (CHECK)
Radiator hosepipes
Check that the radiator hosepipes do not have cuts or are damaged
and that the connections do not have leaks.
Radiator
Check that the radiator ns are not obstructed (insects or mud).
Clean any such obstructions with a jet of water at low pressure.
WARNING
USING HIGH PRESSURE WATER CAN DAMAGE
THE RADIATOR FINS AND DIMINISH THE
EFFECTIVENESS. DO NOT OBSTRUCT OR DIVERT
THE AIR INLET TO THE RADIATOR BY INSTALLING
ANY UNAUTHORIZED ACCESSORIES. INTERFERING
WITH THE RADIATOR MAY CAUSE IT TO OVERHEAT
AND DAMAGE THE ENGINE.