68
Page
WORKSHOP
MANUAL
We reserve the right to modify the product and the design.
MAINTENANCE
COOLANT (CHECK AND CHANGE)
The coolant reservoir is located under the front hood.
The coolant
absorbs excess heat from the engine and transfers it to the air
through the radiator. If the uid level decreases, the engine
overheats and can be severely damaged. Check the uid level
every day.
TECHNICAL INFORMATION
Recommended uid: 50% Long time. (-35 °C).
Checking the coolant level
1. Place the vehicle in a completely horizontal position.
2. Remove the three screws (1) from the cover.
3. Unscrew the cap from the reservoir (2) in an anticlockwise direction
and wait a few seconds until the vapours disperse.
4. Check the coolant level. The liquid must not exceed the line marked
(MAX).
5. If the uid level is low, add the required amount through the lling
aperture.
2
MAX
1
To Next Page
Loading...