• 4 GB on-board storage providing data storage of all IEC 61000-4-30
voltage and current 10-minute values up to the 63
rd
harmonic
component.
• Time stamping
• GPS time synchronization resulting in a time-stamping certainty better
than 1 µs.
• PTP time synchronization resulting in a time-stamping certainty better
than 100 µs.
• NTP time synchronization as an option.
• Communication
• Communication is via Ethernet.
• Modbus over Ethernet.
• DNP3 over Ethernet.
• IEC 61850 – optional.
• Advanced triggering
• User-configurable triggering between different devices: the patented
Xross-Trigger feature (Described in the Osprey Lite user manual)
• Configuration of device
• The Vecto III has to be configured by means of an Ethernet connection to a
local laptop with Osprey Lite installed.
• Data analysis and reporting
• Osprey Lite is supplied free of charge and continuously updated.
• Download from www.ctlab.com.
• It generates both NRS 048 and EN 50160 PQ reports.
• It allows basic and advanced analysis of PQ waveform events and
trends.
• Data can be exported to in .csv and PQDIF format for additional analysis
in third party software packages.
• Data downloading can be automated by configuration of the Vecto III
with Osprey Lite.
To Next Page
Loading...
Need help?
General