1 Safety Instructions
This section provides information on safe handling, installation and commissioning of
the Vecto III. Before carrying out any work on the equipment the user should be
familiar with the contents of this document.
Reference should be made to the device’s wiring diagram and the ratings before
any installation can commence.
1.1 Symbols
Used to call attention to important information.
Used to indicate operating or maintenance procedures to
be respected in order to prevent damage or destruction of
equipment.
Used to call attention to potentially dangerous situations
or danger in general, that requires specific procedures to
be respected in order to prevent personal injury.
Both Direct Current (DC) and Alternating Current (AC)
Hazardous Voltage Present
To Next Page
Loading...