CHAPTER 3.
WEB CONFIGURATIONS
Display which SIM slot is using.
Status of SIM Card
Connectivity
Connect: After manually disconnect, user can only click
Connect button to get connection or reboot the device to
make it automatically connect.
Disconnect: If there is one SIM slot get connection, the
Disconnect button appear. After manually click Disconnect,
the system would not automatically get connection until next
reboot.
Disable: SIM gets connection even it is in roaming state.
Enable: SIM would not get connection when in roaming state.
Three options to show SIM Card’s used status, including Dual
SIM, SIM1 and SIM2.
Three options to set the priority for SIM Card, including Auto,
SIM1 and SIM2. To set up the first link SIM slot from Dual SIM
mode with two SIM cards.
Switch to another SIM when roaming is detected. System will
switch SIM slot when current SIM is in roaming state and another
SIM slot is in READY state.
Entry the time when SIM card starts to activate. This option is
only for Dual SIM mode.
SIM1 Configurations or SIM2 Configurations
Display the status of Dual SIM.
Configure PIN code to unlock SIM PIN.
Fill in PUK to unlock SIM Card after typing more than 3 times.
APN can be input by user or the system will search from internal
database if APN is blank.
The username can be input by user or the system will search
from internal database if the username is blank.
The password can be input by user or the system will search
from internal database if the password is blank.
Fill in your changed password.
Change your old SIM PIN code into new SIM PIN code.
Turn on/off the Data Limitation to disable or enable.
Display current used throughput since last reset.
Configure max throughput.
Set up the reset time during the month.
Show the current time of system.
To Next Page
Loading...
Need help?
General
