CTC Union ICR-4103 User Manual

69
CHAPTER 3.
WEB CONFIGURATIONS
3
3
.
.
8
8
.
.
1
1
.
.
4
4
S
S
e
e
t
t
u
u
p
p
O
O
p
p
e
e
n
n
V
V
P
P
N
N
C
C
u
u
s
s
t
t
o
o
m
m
For Custom of VPN Mode, this section helps you use the .ovpn configuration file to quickly set
up VPN tunnel with third-party server or use the OpenVPN advance options to be compatible
with other servers.
Note:
 When clicking the Import button, you can import third-party OpenVPN configuration that
find out from Internet and save the document into your server or PC. After importing the file,
the interface will show button to click for displaying the information and
to click for downloading the file.
 For third-party OpenVPN configuration, suggest from http://www.vpngate.net/en/
Service > OpenVPN > Server VPN Mode
Item
Description
Server
Client Mode
Only support the Roadwarrior mode.
VPN Network
The network ID for OpenVPN virtual network.
VPN Netmask
The netmask for OpenVPN virtual network.
Roadwarrior:
Route Client Networks
Select from Off or On. The OpenVPN server will route the client
traffic or not. User should fill in the client IP and netmask when
this option is enabled.
NAT
1:1 NAT
 Tick to enable NAT Traversal for OpenVPN. This item must be
enabled when router under NAT environment.
 Select from Off or On. The default is Off.
 When two routers’ LAN Subnet are same and create
OpenVPN tunnels, this function is turned on.
Server- Server Security
Root CA
Create Root CA key.
Cert, Key and DH
Create Cert, Key and DH key.
Server- User Security
User 1 - User 8
According to your requirement, you can create different kinds of
user security key from User 1 to User 8.

CTC Union ICR-4103 Specifications

General

Brand	CTC Union
Model	ICR-4103
Category	Network Router
Language	English