CTC Union ICR-4103 User Manual

26
CHAPTER 3.
WEB CONFIGURATIONS
3.3.4 System > Alarm
This section allows you to configure the alarm.
Note:
(1) If you select SNMP trap in Alarm output, you need to set up SNMP trap configuration from
Service SNMP.
(2) DI trigger "High" means High Trigger. (SW is On to trigger;SW is OFF in Normal state.)
(3) DI trigger "Low" means Low Trigger. (SW is OFF to trigger;SW is ON in Normal state.)
System > Logging > Log
Item
Description
Filter
Filter the required data quickly.
Date
Show the date of log for each logging data.
Group
Show the group of software functions.
Module
Show the module of group of software functions.
Message
Show the messages for each logging data.

CTC Union ICR-4103 Specifications

General

Brand	CTC Union
Model	ICR-4103
Category	Network Router
Language	English