3.8.16 Service > IP Alias
This section allows you to set IP Alias configuration.
IP Alias is associating more than one IP address to a network interface. With IP Alias, one node
on a network can have multiple connections to a network, each serving a different purpose.
IP Alias can be used to provide multiple network addresses on a single physical interface.
3.8.17 Service > GRE
This section allows you to set GRE configuration. The default mode is off.
Generic Routing Encapsulation (GRE) is one of the available tunneling mechanisms which
uses IP as the transport protocol and can be used for carrying many different passenger
protocols. The tunnels behave as virtual point-to-point links that have two endpoints identified
Mode: select from Off or On to use or not use this entry.
Interface: the interface you want to provide the additional
address.
Addr: the IP address.
Mask: the network mask.