CTC Union ICR-4103 User Manual

67
CHAPTER 3.
WEB CONFIGURATIONS
Service > OpenVPN > Client VPN Mode
Item
Description
Client
Client Mode
Only support the Roadwarrior mode.
Server Address
Fill in WAN IP of OpenVPN server.
Route Client Networks
Select from Off or On. This setting needs to match the server
side. When enabled, the mobile router will auto apply the properly
routing rules.
NAT
1:1 NAT
 Tick to enable NAT Traversal for OpenVPN. This item must be
enabled when the router under NAT environment.
 Select from Off or On.
 When two routers’ LAN Subnet are same and create
OpenVPN tunnels, this function should be turned on.
Client-Security
Root CA
The Certificate Authority file of OpenVPN server could be
downloaded from OpenVPN server.
Cert
The certification file is for OpenVPN client, which could be
downloaded from OpenVPN server.
Key
The private key file is for OpenVPN client, which could be
downloaded from OpenVPN server.
P12
The PKCS#12 file is for OpenVPN client, which could be
downloaded from OpenVPN server.

CTC Union ICR-4103 Specifications

General

Brand	CTC Union
Model	ICR-4103
Category	Network Router
Language	English