Chassis
Adjusting the gearshift mechanism
Neutral (1)
High (2)
Low (3)
Reverse (4)
Parking (5)
Shift control cable (6)
Note:
Before shifting you must stop the
vehicle and take your foot off the
accelerator pedal. Otherwise the
transmission may be damaged.
1.
Adjustment
Select lever shift rod
Make sure the shift lever is in
the neutral position
Loosen the locknuts(1)
Adjust the shift rod length for
smooth and correct shifting.
Tighten the locknuts.
Locknut
15 Nm (1.5 m · kg, 11 ft · lb)
To Next Page
Loading...
