EasyManua.ls Logo

Cupra ATECA - Page 170

Cupra ATECA
380 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Infotainment System
Configuration for sharing a connec-
tion over WLAN
Establishing the connection with the wire-
less netw
ork (WLAN)
Press the Infotainment button and then
press the Settings menu.
Activate the wireless network. To do so,
press the WLAN function button.
Activate the wireless network (WLAN) on
the device that is to be connected. If neces-
sary, refer to the manufacturer’s instruction
manual.
Activate the mobile device assignment on
the Infot
ainment System. To do so, press the
Enable WLAN connection button and acti-
vate the checkbox.
Enter and confirm the network key dis-
played on the device.
The following settings can also be made on
the menu Share connection:
Security level: WPA2 encryption auto-
matically generates a network key.
Network key: Network key automatically
generated. Press the function button to
manually change the network key. The net-
work key must have a minimum of 8 charac-
ters and a maximum of 63.
SSID: WLAN Network name (maximum of
32 characters).
Do not send network name (SSID):
Activate the checkbox to deactivate the visi-
bility of the wireless (WLAN) network.
The wireless (WLAN) connection is estab-
lished. To complete the connection, it may
be necessary to enter other data into the de-
vice.
Repeat this process to connect other devi-
ces.
Wi-Fi Protected Setup (WPS)
1)
Wi-Fi Protected Setup can be used t
o cr
eate
a ciphered local wireless network quickly and
simply.
Establish the connection with the wireless
network (WLAN)
page 191.
Press the WPS button on the WLAN router
until the warning light on the router starts
flashing. If the WLAN router does not sup-
port WPS the network must be configured
manually.
OR: Press and hold the WLAN button on
the WLAN router until the WLAN light on the
router starts flashing.
Press the WPS button on the WLAN de-
vice. The wireless (WLAN) connection is es-
tablished.
Repeat this process to connect other devi-
ces.
Configure Internet access
The Infotainment System can use the WLAN
hotspot of an e
xt
ernal device to establish an
internet connection.
Establishing the connection with the wire-
less network (WLAN)
Activate and check the wireless hotspot on
the external device. If necessary, refer to the
manufacturer’s instruction manual.
Press the Infotainment button and then
press the Settings menu; OR access Media
or Media Control mode and press the SET-
TINGS menu.
Press on the menu WLAN > Enable WLAN
connection and check the verification box.
1)
This function depends on the equipment and the
country in question.
168

Table of Contents

Related product manuals