Cupra ATECA - Page 78

Operation
●
The service int
erv
al display can only be re-
set through the Service menu
›››
page 66.
Do not restart the indicator between the
service intervals, otherwise the information
displayed will be incorrect.
If the oil change service is reset manually,
the service interval display changes to a fixed
service interval, also in vehicles with Flexible
oil change service.
Note
●
The service message disappears after a
few seconds, when the engine is started or
when the 
button is pressed on the multi-
function steering wheel.
●
In v
ehicles with the LongLife system in
which the battery has been disconnected
for a long period of time, it is not possible to
calculate the date of the next service.
Therefore the service interval display may
not be correct. In this case, bear in mind
the maximum service intervals permitted
›››
page 340.
●
If you reset the display manually, the next
service interval will be indicated as in vehi-
cles with fixed service intervals. For this
reason we recommend that the service in-
terval display be reset by an authorised
dealer.
Using the instrument panel
Introduction
With the ignition switched on, it is possible to
re
ad the different functions of the display by
scrolling through the menus.
The multifunction display can only be con-
trolled from the buttons on the multi-func-
tion steering wheel.
Some menu options can only be read when
the vehicle is at a standstill.
WARNING
Distracting the driver in any way can lead to
an accident and cause injuries.
●
Never use the menus on the instrument
panel display while the vehicle is in motion.
Note
After loading or changing the 12-volt bat-
tery, check the system settings. If the pow-
er supply is interrupted, the system settings
might be incorrect or deleted.
Operation using the multifunction
steering wheel
Fig. 61
Right side of the multifunction steering
wheel: buttons to the menus and information dis-
plays on the instrument panel.
As long as a priority 1
›
›
›
page 68 warning is
active, it will not be possible to access any
menu. Some warnings can be confirmed and
hidden with the button 
of the multifunc-
tion st
eering wheel
›
››
Fig. 61.
Select a menu or an informative display
●
Switch the ignition on.
●
If a message or vehicle symbol is displayed,
press the button 
›
›
›
Fig. 61; if necessary,
several times.
●
To change menus, use buttons  
or  
›
›
›
Fig. 61.
●
To open the menu or the information dis-
played, press the button 
›
›
›
Fig. 61 or wait
76