User Guide DDOC0099-000-AH
DTS1 CSfC 12 - 3 Command Line Interface
© 2020 Curtiss-Wright Defense Solutions Revision 5.0
Turn on H/W encryption auto key loading. A subsequent load of a H/W encryption key will attempt to auto-mount
Turn off auto-mounting of NAS RMC / partitions
Turn off auto-mounting of NAS RMC / partitions at POR
Turn off auto-mounting of NAS RMC / partitions at first insertion
Turn off auto-mounting of NAS RMC / partitions at subsequent insertion
Turn off auto-mounting of NAS RMC / partitions at canceled removal
Turn on read only mounting option for NAS RMC / partitions. Allowed during auto-mounting only. Doesn't affect CLI
mounting.
Turn off auto-starting of iSCSI target RMC
Turn off auto-starting of iSCSI RMC at POR
Turn off auto-starting of iSCSI RMC at first insertion
Turn off auto-starting of iSCSI RMC at subsequent insertion
Turn off auto-starting of iSCSI RMC at canceled removal
Turn on read only option for iSCSI RMC. Valid during auto-mounting only. Doesn't affect CLI iSCSI target starting.
Configure the block size for the auto started iSCSI targets.
Restart the auto mounter/starter daemon for the RMC described by --slot.
amnt -s 0 --key --on
amnt -s 0 --nas --off
amnt -s 0 --nas --por --off
amnt -s 0 --nas --fin --off
amnt -s 0 --nas --sin --off
amnt -s 0 --nas --can --off
amnt -s 0 --nas --ro --on
amnt -s 0 --iscsi --off
amnt -s 0 --iscsi --por --off
amnt -s 0 --iscsi --fin --off
amnt -s 0 --iscsi --sin --off
amnt -s 0 --iscsi --can --off
amnt -s 0 --iscsi --ro --on
amnt -s 0 --iscsi --blk 512
amnt -s 0 --restart
To Next Page
Loading...
Need help?
General
