Curtiss-Wright VS-DTS1SL-F - Page 63

User Guide DDOC0099-000-AH
DTS1 CSfC 7 - 13 Operation
© 2020 Curtiss-Wright Defense Solutions Revision 4.0
Example of RMC Module Status
NOTE
Add the force option (---force) if changing format from NTFS to ext4.
Format (ext4) / mount partition 1 of a 100GB RMC module with two partitions.
Command:
rmcctl -p 1 -F -M
Example of RMC Module Status
NOTE
Add the force option (---force) if changing format from ext4 to NTFS.
Format (NTFS) / mount partition 2 of a 100GB RMC module with two partitions.
Command:
rmcctl -p 2 -F --fs NTFS -M
Example of RMC Module Status
Change mounted partition 2 format from NTFS to ext4 of a 100GB RMC module with two partitions.
Command:
rmcctl -p 2 -F --force
Example of RMC Module Status
NOTE
Add the force option (---force) if changing format from NTFS to ext4.
Format (ext4) / mount partitions 1 through 4 of a 100GB RMC module.
Command:
rmcctl -p all -F -M
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 100GB NAS 0 na
ext4 1 0 rmc0
[!rmcctl] OK
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 50 GB NAS 0 na
ext4 1 0 rmc0p1
RMC_S0: 1 1 1 2 50 GB NAS 0 na 0 na 0 rmc0p2
[!rmcctl] OK
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 50 GB NAS 0 na ext4 1 0 rmc0p1
RMC_S0: 1 1 1 2 50 GB NAS 0 na
NTFS 1 0 rmc0p2
[!rmcctl] OK
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 50 GB NAS 0 na ext4 1 0 rmc0p1
RMC_S0: 1 1 1 2 50 GB NAS 0 na
ext4 1 0 rmc0p2
[!rmcctl] OK