4. After conrming the radiator cap is
not hot, unscrew it counterclock-
wise slowly pressing it down. Un-
screw it in several steps to remove
any inner pressure safely.
5. Remove the cap after the inner
pressure is removed.
(1) Brush guard (upper)
(2) Brush guard (middle)
(3) Brush guard (lower)
6. Remove the lowest grille from the
brush guard.
(1) Coolant Drain Plug Of Radiator
7. Place a container with wide open-
ing under the vehicle and open the
drain plug to drain the coolant.
UUVo730A
UUVo731A
UUVo732A
2
(1) Engine Coolant Drain Plug
(2) Engine Oil Filter
8. Now drain the coolant from the en-
gine by removing the engine cool-
ant drain plug.
To Next Page
Loading...
