7 WIRELESS COMMUNICATION
Q3x BTH, Q3x Wi-Fi
The Bluetooth or Wi-Fi connectivity of the printer allows the wireless printing from a PC (e.g. using a text editor or third-
part software) or from a mobile device Android, iOS and Windows Phone after installing the application “CustomPrint”,
downloadable from the web site
www.custom.biz.
To perform the wireless printing with a printer equipped with Bluetooth or Wi-Fi connectivity is needed to pair with device.
NOTE: The windows used in this paragraph may be different from the screens that appear on the device used for print-
ing and may vary depending on the version of the operating system.
7.1
Q3x BTH
Turn on the printer (see paragraph 5.1).
On the PC status bar click the
Bluetooth icon.
Configure the parameters “Wireless” to “ON” and “BT
AutoReconnect” to “Disabled” in one of the modes
described in the previous paragraphs (see chapter 6).
ON/OFF
Write down the 16-digits serial number indicated
on the label of the printer (see paragraph 3.4).
XXXXXXXXXXXXXX
Rx
<numero di serie>
Wireless.............................: ON
BT AutoReconnect.............: Disabled
1
2
4
3
Write down the 16-digits serial number indicated
on the label of the printer (see paragraph 3.4).
Turn on the printer (see paragraph 5.1).
AutoReconnect” to “Disabled” in one of the modes
described in the previous paragraphs (see chapter 6).
51
To Next Page
Loading...
Need help?
General
