10.7
The printer has 3 internal fonts with a width of 11, 15, 20 cpi, which can be associated with one of the coding tables stored
on the device.
The selection of the font and the encoding table is done via command (see the commands manual of the device) or through
the setup procedure by properly setting the parameters “Chars / Inch” and “Code Table” (see
paragraph 6.5).
The following is the complete list of coding tables that can be installed on the device.
<Code Table> CHARACTER TABLES
0 PC437 - U.S.A., Standard Europe
1 Katakana
2 PC850 - Multilingual
3 PC860 - Portuguese
4 PC863 - Canadian/French
5 PC865 - Nordic
11 PC851 - Greek on request
12 PC853 - Turkish on request
13 PC857 - Turkish
release 4.1 and
subsequent
14 PC737 - Greek
15 ISO8859-7 - Greek on request
16 WPC1252 on request
17 PC866 - Cyrillic 2
18 PC852 - Latin 2
19 PC858 for Euro symbol at position 213
20 KU42 - Thai
21 TIS11 - Thai on request
26 TIS18 - Thai on request
30 TCVN_3 - Vietnamese on request
31 TCVN_3 - Vietnamese on request
32 PC720 - Arabic on request
33 WPC775 - Baltic Rim on request
34 PC855 - Cyrillic
90
To Next Page
Loading...
Need help?
General
