7.2
Q3x BTH
Send File to Device...
Browse File to Device...
Open Bluetooth Preferences...
Bluetooth: On
Turn Bloetooth Off
XXXXXXXXXXXXXX
<serial number>
Bluetooth
Search
Turn Bluetooth Off
Now discoverable as
<Bluetooth>
Bluetooth On
Devices
<device_serial number>
Not connected
Pair
Advanced...
Show Bluetooth in menu bar
?
Write down the 16-digits serial number indicated
on the label of the printer (see paragraph 3.4).
If parameter “Pairing BT” of the printer is set to
“Disabled” (see paragraph 6.5), locate your printer
(<device_serial number>) and select it with a click.
Click the NEXT key to confirm the pairing
and skip to step 10.
On the PC status bar click the Bluetooth icon.
In the dropdown menu click
OPEN BLUETOOTH PREFERENCES.
“Pairing BT” = Disabled
Configure the parameters “Wireless” to “ON” and “BT
AutoReconnect” to “Disabled” in one of the modes
described in the previous paragraphs (see chapter 6).
Wireless.............................: ON
BT AutoReconnect.............: Disabled
Turn on the printer (see paragraph 5.1).
ON/OFF
1
2
4
3
6
5
Write down the 16-digits serial number indicated
on the label of the printer (see paragraph 3.4).
Turn on the printer (see paragraph 5.1).
AutoReconnect” to “Disabled” in one of the modes
described in the previous paragraphs (see
chapter 6).
If the parameter “Pairing BT” of the printer is set to
“Disabled” (see paragraph 6.4), locate your printer
(<device_serial number>) and select it with a click.
and skip to step 10.
54
To Next Page
Loading...
Need help?
General
