Custom Audio Electronics Q3X - 7.5 Bluetooth pairing with iOS devices

7.5 
Q3x BTH
Press the Bluetooth icon.
Press the SETTINGS icon,
on your iOS device.
Bluetooth
Setting Bluetooth
Bluetooth
Move the switch to ON to enable the Bluetooth
communication and start searching
for available devices .
XXXXXXXXXXXXXX
<serial number>
Write down the 16-digits serial number indicated
on the label of the printer (see paragraph 3.4).
Configure the parameters “Wireless” to “ON” and “BT
AutoReconnect” to “Disabled” in one of the modes
described in the previous paragraphs (see chapter 6).
Wireless.............................: ON
BT AutoReconnect.............: Disabled
Turn on the printer (see paragraph 5.1).
ON/OFF
6
4
5
1
2
3
Write down the 16-digits serial number indicated
on the label of the printer (see paragraph 3.4).

AutoReconnect” to “Disabled” in one of the modes
described in the previous paragraphs (see
chapter 6).
Turn on the printer (see paragraph 5.1).
60