CYBEX Arc Trainer 772A User Manual

Remove fan
1. Unplug CardioTouch cable from CardioTouch board.
Qty.DescriptionItem
1Console assembly1
1Louver2
1Fan3
5Screw4
1CardioTouch cable5
2. Unplug the fan cable from the MCC board.
3. Remove screws securing the fan and louver to the console assembly using a Phillips screwdriver.
Remove components from bezel
1. Remove the five screws securing the MCC board and cable clamp to the monitor using a Phillips
screwdriver.
Qty.DescriptionItem
1Bezel1
1MCC board2
1Monitor3
2Book tab4
1Thumb control cable5
1CardioTouch board6
2Cable clamp7
14Screw8
2. Remove the seven screws securing the CardioTouch board and cable clamp to the monitor using
a Phillips screwdriver.
3. Unplug thumb control cables from the bezel.
4. Remove the two screws securing the book tabs to the bezel using a Phillips screwdriver.
Page 195 of 202
Cybex 772A, 772AT Arc Trainer Part Number

CYBEX Arc Trainer 772A Specifications

General

Brand	CYBEX
Model	Arc Trainer 772A
Category	Fitness Equipment
Language	English