10D-Link DAP-1520 User Manual
Section 2 - Installation
Connect your wireless clients to the DAP-1520. From your
wireless device, go to the Wireless Utility to display the
available wireless networks and select the Wi-Fi Name
(SSID) for the DAP-1520. Both the Wi-Fi Name and Wi-Fi
Password are on the specication sticker located on the
underside of the device.
For instructions about using WPS to connect your devices,
refer to “Connecting to a Wireless Client” on page 42. Or
consult your device’s user manual for more information.
Once connected, you can begin the configuration
process.
Step 5 -
Note: For instructions for changing your Wi-Fi Name and Wi-Fi Password, refer to “Extended Wi-Fi Settings” on page 30.
Note: When using WPS to connect to the router, the SSID on the DAP-1520 will automatically be assigned the following:
• 2.4GHz: (Your Router’s SSID)-EXT
• 5GHz: (Your Router’s SSID)-EXT5G
The Wi-Fi passwords for your router will be the same as your passwords for the DAP-1520.
To Next Page
Loading...
