D-Link DAP-1520 - Autoconfiguration (Slaac;Dhcpv6)

32D-Link DAP-1520 User Manual
Section 3 - Conguration
My IPv6
Connection is:
Obtain DNS
Server Address:
Primary DNS
Server:
Secondary DNS
Server:
Select Autoconguration (SLAAC/DHCPv6) to have the
DAP-1520 automatically receive an IPv6 address from the
uplink router.
You can select Obtain IPv6 DNS Servers automatically,
or you can select Use the following IPv6 DNS Servers to
congure DNS servers manually.
If you selected the manual option above, enter the Primary
IPv6 DNS Server address.
If you selected the manual option above, enter the
Secondary IPv6 DNS Server address. This is optional but
will provide backup if the primary server fails.
IPv6 Device Management Interface
Autoconguration (SLAAC/DHCPv6)