D-Link DAP-1520 - System

36D-Link DAP-1520 User Manual
Section 3 - Conguration
Save the system settings to a le on the local hard drive of
your computer. You will then see a le dialog, allowing you to
select a location and enter a le name for the conguration
le.
Load the system settings from a previously saved le on the
local hard drive.
Restore the system settings to factory default settings. This
will erase all currently stored settings.
Click Reboot to reboot the DAP-1520.
Save Settings
To Local Hard
Drive:
Load Settings
From Local
Hard Drive:
Restore
to Factory
Default
Settings:
Reboot the
Device:
System
This page allows you to save or restore your system conguration, reset, or reboot the DAP-1520. From the Home page, click
on the Management drop down menu at the top of the page, and select System.