41D-Link DAP-1520 User Manual
Section 4 - Wireless Security Options
Conguring WPA/WPA2 Personal
If you did not enable wireless security during initial setup, it is recommended that you do so using the web-based conguration
utility. Establish wireless connectivity before enabling wireless security. If you prefer WPS, proceed to “Connecting to a Wireless
Client” on page 42.
2. Enter the Admin Password (blank by default) and click Login.
Note: By default, Admin is the user name. If you did not create a
password, it should be left blank.
1. Log into the web-based conguration by opening a web browser
and entering http://dlinkap.local./.
3. The conguration interface will open to the Home page. Click on
the Settings drop-down menu and select Wi-Fi. Then congure
the Wi-Fi network you would like your DAP-1520 to connect to.
To Next Page
Loading...
