D-Link DES-3326S - Page 179

D-Link DES-3326S Layer 3 Switch CLI Reference
config radius delete
Purpose Used to delete a previously entered Radius
server configuration.
Syntax
config radius delete <server_index 1-3>
Description
The config radius delete command is used to
delete a previously entered Radius server
configuration.
Parameters
<server_index 1-3> − Assigns a number to the
current set of Radius server settings. Up to 3
groups of Radius server settings can be entered
on the Switch.
Restrictions Only administrator-level users can issue this
command.
Example usage:
To delete previously configured Radius server communication settings:
DES-3326S:4#config radius delete 1
Command: config radius delete 1
Success.
DES-3326S:4#
173