D-Link DES-3326S - Page 271

D-Link DES-3326S Layer 3 Switch CLI Reference
disable pim
Purpose Used to disable PIM function on the Switch.
Syntax
disable pim
Description This command will disable PIM for the Switch.
Any previously configured PIM settings will
remain unchanged and may be enabled at a later
time with the enable pim.
Parameters None.
Restrictions Only administrator-level users can use this
command.
Usage Example:
To disable PIM on the Switch:
DES-3326S:4#disable pim
Command: disable pim
Success.
DES-3326S:4#
265