D-Link DES-3326S - Page 272

D-Link DES-3326S Layer 3 Switch CLI Reference
show pim neighbor
Purpose Used to display PIM neighbor router table
entries.
show pim neighbor {ipif <ipif_name 12> |
ipaddress <network_address>}
Description This command will list current entries in the PIM
neighbor table for a specified IP interface or
destination router IP address.
ipaddress - The IP address and netmask of the
destination routing device for which you want to
view the neighbor raouter table. You can specify
the IP address and netmask information usnig
the traditional format or the CIDR format. For
example, 10.1.2.3|255.255.0.0 or 10.2.3.4|16.
If no parameters are specified, all PIM neighbor
router tables are displayed.
Restrictions None.
Syntax
Parameters ipif – The name of an IP interface for which you
want to view the PIM neighbor router table.
Usage Example:
To display PIM settings as configured on the Switch:
DES-3326S:4#show pim neighbor
PIM Neighbor Address Table
System 10.48.74.122 5
Command: show pim neighbor
Interface Name Neighbor Address Expire Time
--------------- ---------------- -----------
Total Entries : 1
DES-3326S:4#
266