D-Link DES-3326S - Page 286

D-Link DES-3326S Layer 3 Switch CLI Reference
Usage Example:
To show OSPF state:
DES-3326S:4#show ospf
Command: show ospf
0.0.0.0 Normal None None
OSPF Router ID : 10.1.1.2
State : Enabled
OSPF Interface Settings
Interface IP Address Area ID State Link Metric
Status
------------ ------------------ --------- -------- --------- ---------
System 10.90.90.90|8 0.0.0.0 Disabled Link DOWN 1
ip2 20.1.1.1|8 0.0.0.0 Disabled Link DOWN 1
ip3 30.1.1.1|8 0.0.0.0 Disabled Link DOWN 1
Total Entries : 3
OSPF Area Settings
Area ID Type Stub Import Summary LSA Stub Default Cost
--------------- ------ ----------------------- -----------------
10.0.0.0 Normal None None
10.1.1.1 Normal None None
20.1.1.1 Stub Enabled 1
Total Entries : 4
280