D-Link DES-3326S - Page 301

D-Link DES-3326S Layer 3 Switch CLI Reference
show ospf neighbor
Purpose Used to display the current OSPF neighbor
router table.
Syntax
show ospf neighbor {<ipaddr>}
Description This command will display the current OSPF
neighbor router table.
<ipaddr> − the IP address of the neighbor router.
Parameters
Restrictions None.
To display the current OSPF neighbor router table:
DES-3326S:4#show ospf neighbor
Command: show ospf neighbor
--------------- --------------- -------- ------------
DES-3326S:4#
Usage Example
IP Address of Router ID of Neighbor Neighbor
Neighbor Neighbor Priority State
10.48.74.122 10.2.2.2 1 Initial
295