D-Link DGS-1510/ME Series - Page 103

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
99
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable auto-configuration:
DGS-1510-28XMP/ME:admin# disable autoconfig
Command: disable autoconfig
Success.
DGS-1510-28XMP/ME:admin#
9-3 show autoconfig
Description
This command is used to display if the auto-configuration is enabled or disabled.
Format
show autoconfig
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To show autoconfig status:
DGS-1510-28XMP/ME:admin# show autoconfig
Command: show autoconfig
Autoconfig State: Disabled
Timeout : 50 sec
DGS-1510-28XMP/ME:admin#