D-Link DGS-1510/ME Series - Show Syslog

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
581
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable the sending of syslog messages:
DGS-1510-28XMP/ME:admin# enable syslog
Command: enable syslog
Success.
DGS-1510-28XMP/ME:admin#
70-5 disable syslog
Description
This command is used to disable the sending of syslog messages.
Format
disable syslog
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable the sending of syslog messages:
DGS-1510-28XMP/ME:admin# disable syslog
Command: disable syslog
Success.
DGS-1510-28XMP/ME:admin#
70-6 show syslog
Description
This command is used to display the syslog protocol global state.